31
hold the original conversation. When some one call in when you
are busy on another phone call , you will hear a du-du call waiting
signal, please use flash key on your phone to hold the original call
and answer the incoming call, press again flask key will switch
back the original call party.
Disable:
Disalbe the Call waiting function. The gateway will reply
the busy to remote side when the line is on used.
Index Area Code Auth Strip
Prefix
Maximum Minimum From To LineNo RS Verify CallWaiting
Alert
Profile
Forward
Delete
1 1
□
□
Rs1 Enable
Delete
2
2
□
□
Rs
Delete
3 3
□
□
rs3_2_1
Delete
l.
Alert
:
Control the Ring Back tone generate timing:
Mode 0: When this VoIP Router get ring back tone from phone line, it
will send the ring Alert signal to remote VoIP Router for generate ring
back tone.
Mode 1: Before this VoIP Router dial to phone line, it will send the ring
Alert signal to remote VoIP Router for generate ring back tone.
Mode 2: After this VoIP Router finish dial out number to phone line, it
will send Connect OK signal to remote VoIP Router.
Mode 3: Before this VoIP Router dial to phone line, it will send the ring
Alert signal to remote VoIP Router for generate ring back tone, after
this VoIP Router finish dial out number to phone line, it will send
Connect OK signal to remote VoIP Router.
m.
Profile:
Define the optional special VoIP parameters when received on this
destination. Please input the name you defined on the profile list
(
/
VoIP
Setup
/
Routing Setup/Routing Profile/)
.
Example: if user set the VoIP Call in & Routing Profile like below:
Index Area Code Strip
Prefix
Maximum Minimum From To LineNo Gatekeeper
Alert
Profile
Forward
Delete
1 1
PF1
Delete
2
2
PF2
Delete
3 3
Delete
Index
Name
VAD
CODEC
H.245
Tunneling
DTMF
Relay
T.38
FAX Relay
Package
Frame
Q.931
Fast
Start
ID1
AS
ID2
AS
ID3
AS
ID4
AS
Delete