Start Measuring
Start Measuring
Weight Only Operation
Your TRANSTEK Body Fat Analyzer will operate as a conventional weight - reading
scale. No special programming steps are required.
Once the scale is initialized, as previously described, you may simply step on the scale to
measure your current weight. For only weight reading.
1. Position the scale on a flat, hard surface. Carpeted or uneven floors may affect
accuracy.
2. Step onto the scale platform and remain still while the scale computes your weight.
3. The scale will display your weight value.
4. The scale will automatically turn off after a few seconds.
STEP 1:
Step on the platform barefooted when the LCD displays “0.0”.
First Measurement
3RVLWLRQVFDOHRQDILUPIODWVXUIDFH
3UHVV6(7NH\
:KLOHWKHXVHUQXPEHURIWKHODWHVWPHDVXUHPHQWLVIODVKLQJVHOHFW\RXUXVHUQXPEHUE\
pressing or key. After 3s, the selected number is locked, the scale shows zero
reading.
(Note: When the user number is flashing, if you press SET key again, it will enter the
setting mode, after all the settings are finished, it will display zero reading. )
With original SENSE ON patent technology, 0393 will switch on as you step on the
platform barefooted.
Daily Measurement
Stand still and keep full contact with the electrodes until the LCD stops displaying
moving “o”.
STEP 2:
Stand still until the weight data locked. Keep full contact with the electrodes until
the LCD stop displaying moving “o”.
STEP 3: The measurement results will be displayed followed by
BMI, Body Fat,
Muscle Mass, Bone Mass and Body Water. The data will be displayed three
times and then turn off.
* If it fails to complete the analysis, the LCD will only display the weight data.
(
7RILQGRXWWKHVROXWLRQVSOHDVHUHIHUWR7URXEOHVKRRWLQJIRUPRUHGHWDLOV
)
