Initial Start-Up
Start Measuring
After confirming Stature, the system will divert to Age setting.
As pictured below, the digits “30” blinks. The operator may press the function key or
to increase or decrease the numeral.(Normal Range:10-85 years old)
You may press and hold the function key or for fast changing the numeral.
Press “SET” key to confirm Age.
4.Setting Age
After confirming Gender, the system will divert to Stature setting automatically.
As pictured below, the digits “ 165 ” blinks. The operator may press the function key
or to increase or decrease the numeral. (Range:100cm-220cm)
You may press and hold the function key or for fast changing the numeral.
Press “SET” key to confirm Stature.
3.Setting Stature
6. Repeat procedure for a second user, or to change user details.
Note: To update or overwrite the memorised data, follow the same procedure,
making changes as required.
5. After confirming the Age, the LCD will display “Step” and “On” alternately, then you
can start measuring.
1. Press the platform centre and remove your foot.
2. “0.0” will be displayed.
3. The scale will switch off and is now ready for use.
This initialisation process must be repeated if the scale is moved. At all other times
step straight on the scale.
Initialising Your Scale
With batteries correctly installed, press “UNIT” button in the back of the scale to select
measurement unit. The default measurement unit is “lb”. You may press “UNIT” button to
choose between pound and kilogram.
Select Measurement Unit
