Safety
Unauthorized conversion and production of spare
parts
760.0002 GB - 150 500
BA-2011.11
Series AE1F, AE1L, AE.E, AE.N, AE.H, AE.V, AED1E,
AED2N
ID, ZD construction types
5
Pumps or systems that move hazardous
liquids must be decontaminated.
The points listed under the section "Initial
startup" (
page 18) must be observed before
bringing the machine back into operation.
Required adjustment, maintenance, and
inspection tasks must be performed according
to schedule.
Operating personnel must be informed before
starting maintenance and repair tasks.
All upstream and downstream parts of the
system and operating media like compressed
air and hydraulics must be secured against
unintentional restarting.
When performing any maintenance,
inspection, and repair tasks, always shut off
the power to the system and secure the switch
against unintentional restarting.
►
If possible, lock the main switch and
remove the key.
►
Or attach a sign that warns against
restarting.
Immediately after concluding the work, replace
all safety and protection devices, bring them
back into operation, and test their functionality.
2.7 Unauthorized conversion and
production of spare parts
Changes to or conversion of the machine is
permissible only with the approval of the
manufacturer. Original spare parts and
manufacturer-approved accessories promote
safety. Use of other parts will nullify liability for
any resulting consequences.
2.8 Impermissible operating
methods
Operational safety of the delivered machine is
ensured only through proper use as described
in Section 1 of the operating instructions.
Never exceed the limit values specified in the
data sheet.
2.9 Protective clothing
Protective gloves
Wear protective gloves at all times.
Footwear
Wear sturdy, insulated safety shoes with steel
tips. This will protect your feet from falling
parts.
Safety glasses
Wear safety glasses when working near the
shaft seal area.
Clothing
Wear suitable clothing. Do not wear synthetic
items of clothing. These have a risk of catching
fire.
2.10 Residual risks
Functional inspection and/or adjustment
requires unhindered access to the shaft seal.
Danger!
Danger of being drawn in and
trapped. Perform work on the pump
only when the pump is shut down.