Allure Melanger 4-0.25-230-50-A, Owner'S Manual, Page: 11 / 29

2.6. Principle
The construction of the equipment consists of a body 4, a bowl 3. A motor 5 is mounted on the body, rotating
the bowl 3 and two runners 2. The bottom of the bowl and two runners are made of solid dense granite.
Suspension of runners to the upper beam is made through the bar of the clamping device of the millstones.
Pressing granite runners to the granite bottom of the bowl is carried out with the help of springs. The rotation
of the bowl is carried out from the electric motor through a chain drive in the body of the Melanger. When
the bowl is rotated, the components on the granite bottom of the bowl are grinded and mixed with granite
millstones. Stirring and removal from the walls of the cup of chocolate mass is carried out with the help of
blades (scrapers). The control panel 6 is located on the left side of the body.
2.7. Operation
The controls are located on the melange control unit (Figure 2).
The Melanger is controlled by signals coming from the control unit.
- switch 1 is designed to switch on the power supply of the Melanger,
- thermostat 2 shows the current temperature of the loaded mass, and also controls in automatic mode the
maximum temperature set by the operator,
- Button 3 starts the bowl rotation,
- Button 4 stops the bowl rotation (emergency stop button),
- Knob 5 is designed to change the speed of rotation of the bowl,
- indicator 6 is lit when power is available;
- connector 7 of the removable product temperature sensor in the bowl;
- button 4 of the emergency stop of the Melanger;
- network fuse 8.
When the current protection is activated, the Melanger is automatically switched off.
10