Alltech Keenan MechFiber350, Operator'S Manual

Page: 3 / 69

KEENAN
MechFiber350 and 370 Operator’s Manual
3
Revision D01 21
st
May 2019
SECTION CONTENTS PAGE
PART I (Service and Maintenance)
1 Introduction 4
2 Warning notes 5
3 Warning signs 6
4 Operating principles 7
4.1 Weighing 7
4.2 Chopping/mixing 7
4.3 Feeding out 8
4.4 Maintenance 8
4.5 Safety precautions 9
5 Safety 9
6 Weighing system 13
7 Operation 14
7.1 Set-up 14
7.2 Hitch height adjustment 16
7.3 Mixer wagon capacity 17
7.4 Loading and mixing 18
7.5 Operating the KEENAN MechFiber mixer wagon 19
7.6 Operating the KEENAN bale handler 20
7.7 Specific instructions for bale handler models 21
7.8 Washing and chopping root crops 22
7.9 Feeding out 22
8 Maintenance 23
8.1 Chains 23
8.2 Chain tensioning 25
8.3 Greasing 26
8.4 Maintenance for blades 29
8.5 Maintenance for bale handler models 29
8.6 Shear bolts 30
8.7 Nuts and bolts 31
8.8 Tyres 31
8.9 Wheels 32
8.10 Rear feed-out elevator (where fitted) 32
8.11 Side and sub feed-out elevator (where fitted) 33
9 Maintenance checklist 34
10 Specifications 35
PART II (Spare Parts)
11 Parts list 37
11.1 Front cover parts 38
11.2 Drive line parts 40
11.3 Rotor parts 42
11.4 Auger parts 43
11.5 Auger chamber 44
11.6 VFC-door indicator parts 45
11.7 Standard feed-out tray parts 46
11.8 Fold-down tray parts 48
11.9 Inner body parts 51
11.10 Rear panel parts 52
11.11 Chassis parts 53
11.12 Bale handler parts 54
11.13 Axle parts 59
11.14 Ancillary parts 61
12 Troubleshooting 62
12.1 General troubleshooting 62
12.2 Weighing troubleshooting 65
13 Warranty 66
14 EC declaration of conformity/CE certification 67
15 Contact details 68