Auto-Pure Mini Operation Manual
Chapter 4 Operations
8
Note: Please pay more attention to magnetic rods during the operation in
case any damage!
2. Power Connection
AC 100 ~ 240V
3. Kits Installation
3.1.
96-Deepwell plate installation
Open the cabin door. First, place the plate with the sample in the position slot
according to the arrow ①. Then press the plate into the heating strip
according to the arrow ②, and place it smoothly. Note the orientation of the
plate (kit corner A1 corresponds to the marker A1 on the instrument) to avoid
the wrong sequence of reagents. After the plate is in place, close the door.
Fig 9 96-Deepwell plate installation
3.2.
Single sample kit installation
Single sample kit trays are placed in the same way as 96-Deepwell plates. The
difference is that the single-sample kit tray can hold 1~8 single-sample kits, and
the number of single-sample kits can be determined according to the number
of samples.
96-Deep well plate
Summary of Contents for Auto-Pure Mini
Page 51: ...Memo...
