ALLSAT COME2ASCOS, Quick Reference, Page: 5 / 26

Q
UICK
R
EFERENCE COME
2
ASCOS AND COME
2
ASCOS BLUE
4
I
NSTALLATION
To configure the come
2 ascos once please follow the steps mentioned below
in the short overview. Each single step will be explained in detail later on.
- Change the PIN of your SIM card to 2204.
- Open the front of the enclosure carefully.
- Insert the SIM card into the GSM/GPRS modem.
- Mount the front panel again.
- Plug the come 2 ascos device to your Personal Computer using the
configuration cable.
- Supply the come 2 ascos device with stabilized power within a voltage
range from 8 to 13.5 Voltage.
- Start the configuration software and choose the serial interface at your
Personal Computer.
- Perform your individual settings and transmit the configuration.
- For come 2 ascos blue : Connect the additional module to your Personal
Computer using the configuration cable and switch it on.
- For come 2 ascos blue : Configure the Bluetooth connection if necessary.
- Integrate the come 2 ascos device into your system. Here for plug in
data and power supply cable.
- Switch on the come 2 ascos device and the GNSS receiver.
- Configure your GNSS receiver for NMEA output to the come 2 ascos
device.