Chapter 1: Introducing the SG-9100
Allot SG-9100 Hardware Guide
1-4
Transceivers
NOTE
All Transceivers MUST be provided by Allot specifically for the
SG-9100. Any other Transceivers will not function in the SG-
9100.
The following transceivers (available from Allot) may be used with the SG-9100:
10G Fiber
SG-TRNSCV-10G-SR
SG-TRNSCV-10G-LR
1G Fiber (Dual Rate)
SG-TRNSCV-1G-SX-A
SG-TRNSCV-1G-LX5-A
1G Copper (10/100/1000)
SG-TRNSCV-1G-COP-A
NOTE
1G Copper interfaces may only use the 8 Port Bypass Unit if
available, limiting the number of ports which may be used on
the SG-9100.
Connectors
The SG-9100’s 8-port and 16-port Fiber Bypass Units use Multi Mode fiber (MM) or
Single Mode fiber (SM) dual LC Connectors. The 24-port Fiber Bypass unit uses MTP
Fiber connectors. The 8-port Copper Bypass Unit uses dual RJ45 connectors.
Figure 1-1 – Full Duplex LC Connector
NOTE
Color and appearance of actual connectors may vary
.