8
INSTRUCTIONS
Simultaneously, press and hold the buttons “on” and “off” of your new remote control
The LED flashes, comes off then on again
Release the buttons
Your new remote control is now in learning mode
Press the button on your new remote control that you want to program
The LED comes on
Release the button
Enter your personal code by pressing 12 times the buttons on and off
For every push, wait until the LED comes on then off. Release the button
Create your own code
Press both buttons of your remote control
The LED flashes, comes off then on again
Release both buttons
Press the button you wish to program
Enter the code by pressing 12 times on the on and off buttons
Connect your new remote control to your receiver
Press channel 1 of your receiver
ALLDUCKS 6204
Visit our website: www.Alloremotecontrol.com
The LED
