![background image](http://html1.mh-extra.com/html/allo-com/pstn-voip-pbx/pstn-voip-pbx_quick-installation-manual_2903739007.webp)
PSTN/VoIP PBX
Quick Installation Guide v2.1
4
Accessing the Main Web GUI of
PSTN/VoIP PBX
After completion of the quick setup wizard, unit will reboot and you can access the
main Web GUI through WAN IP address of PSTN/VoIP PBX
Create Extensions (Analog and SIP):
This is where you create your extensions.
1. Click on the
Setup
Æ
Extensions
link in your GUI, create a
NEW USER
2. Assign an Extensions Number, Name and Dial Plan you want to associate
with this Ext.
3. In the Technology field, select the type of Extension this will be. Analog or
SIP?
4. Repeat to create several Extensions.
5.
UPDATE
and
APPLY CHANGES
6. You have created extensions, make sure you have your Analog phones
plugged in the ports or use your credentials to set up your sip clients.
Create Analog Trunks (Lines):
This will allow you to make calls using your PSTN analog line.
1. Connect your PSTN (FXO) line to the LINE 1 port of the PSTN/VOIP PBX
2. Click on the
Setup
Æ
TRUNKS
link in the GUI, then select
ANALOG
TRUNKS
3. Select Channel 1 (since you plugged the line into Line port 1 of the NANO)
and Name your Trunk (Office Line 1 for example).
4. Click
ADD
and then
APPLY CHANGES
(top right corner of your GUI)
5. You have a live analog line plugged to your PSTN/VoIP PBX.
Summary of Contents for PSTN / VoIP PBX
Page 1: ......
Page 2: ...Quick Installation Guide PSTN VoIP PBX Version 2 1...