![background image](http://html1.mh-extra.com/html/allo-com/pstn-voip-pbx/pstn-voip-pbx_quick-installation-manual_2903739004.webp)
PSTN/VoIP PBX
Quick Installation Guide v2.1
1
Hardware Setup
1. Unpack your PSTN/VOIP PBX and make sure you received everything.
Each box contains: PSTN/VOIP PBX -1 No
AC adapter (120V-220V) + 2 wall plugs (EU & US) -1 No
Ethernet cable and Serial Cable -1 No
2. Plug in your PSTN/VOIP PBX LAN port to your PC using the network cable
provided
3. Plug the power cable to the PSTN/VoIP PBX. After 10 secs, all the 6 LEDs
start blinking and LEDs turn to orange after the completion of boot up.
4. Check your PC network settings and make sure you have enabled the DHCP
5. Use following IP address in web browser to start the configuration process:
192.168.113.1:8088
6. Factory default login credentials are:
Username: admin/Password: admin
Important Note
:
We strongly recommend you change these to reduce the possibility of a security breach.
Summary of Contents for PSTN / VoIP PBX
Page 1: ......
Page 2: ...Quick Installation Guide PSTN VoIP PBX Version 2 1...