- 39 -
Event Configuration >> Motion Detect Trigger
Select the
Enable
option to enable the trigger function of the camera,
so that you can send captured images within the detecting area to
the FTP server, email receiver, Network Storage server, or the
connected USB device. You have to configure corresponding
settings, such as FTP server and email server, to enable this feature.
-
Schedule Profile:
Select a schedule profile from the pull-down
list.
-
Action:
Select the destination that the captured images will be
sent to:
Send Email
,
FTP Upload
,
Record to Network
Storage
, or
Save Image to USB
.
Event Configuration >> Schedule Trigger
You can separately configure the schedule for trigger function of the
camera by
,
FTP
, or
Network Storage
. Select the
Enable
option on each item, and then select a
Schedule Profile
from the
pull-down list and set the
Interval
time.
NOTE
If the setting value of the
Network Storage Recording Time
Per Event
option in General Setting is longer than the
Interval
time in Network Storage Schedule, the recorded file
will be a continuous video clip.
For example, if you set the
Network Storage Recording
Time Per Event
as 10 seconds and the
Interval
as 5 seconds,
recorded file becomes a non-stop video clip because the
camera will record a 10-second video clip every 5 seconds.
