© 2015 ALLNET GmbH Computersysteme - All rights reserved Page 9
Errors and omissions excepted
PAIR Button Usage:
1.
Set 2nd device into same group (private network):
Step 1.
Press and hold the device’s “PAIR” button for 3 seconds at same time. You can then
release the button and this device would join into the same private network.
2.
Add a new device to the existing private network:
Step 1.
Plug in the new device and one already grouped device. Press and hold its “PAIR ”
button
3 seconds at same time.
Step 2.
The new device starts to communicate with the device from existing private network,
and tries to join this existing private network.
Step 3.
If the process failed, please repeat Step 1 to Step 2 again.
3.
Leave the private network:
Step 1.
If you want the device to leave the existing private network, press and hold the device’s
“PAIR” button for 5-10 seconds to randomize the network encryption setting. This
device will then not be connected to the private network any more.
4.
Reset the device to the factory default setting:
Push the device’s “PAIR” button for 10-15 sec seconds. You will see the device’s LEDs are all
turning off and the device will restart. The device’s setting resets to the “factory defaults”.