ALL168207 Coaxial Network Adapter
©
2008. All rights reserved. Page 6
As wireless AP (Access Point) Extender via coaxial cable
Connect the Coaxial Ethernet Bridge to the AP:
Plug the provided Ethernet cable into the RJ45 connector of the Coaxial Ethernet Bridge and plug the
other end of the cable into the Ethernet port on the wireless AP.
Use the coaxial cable to connect the Coaxial Ethernet Bridge
’s F Connector and a coax jack on the
wall.
Connect the power cord to Coaxial Ethernet Bridge and plug the power cord to outlet.
The Power LED indicator will light on after plugged to outlet.
To set up your coax network
If you would like to use the existing coaxial cable in your home to set up the coax network, you can follow up the
below procedure.
1.
If you want to share the same coaxial cable for TV and coax network, please find a Coax Splitter to
deliver the signal to TV and PC. If you don
’t need to connect to TV, please connect to PC via the Coaxial
Ethernet Bridge directly. You won
’t need the Coax Splitter.
TV
PC
The signal from the
same coaxial cable
Ethernet cable
Coax Splitter
Wireless AP
To Power outlet
Coaxial Ethernet
Bridge
Coax jack on the wall
