ALL168207 Coaxial Network Adapter
©
2008. All rights reserved. Page 5
Product installation guide
To install PC local network and transmit data via coaxial cable:
1.
Use the supplied Cat 5 Ethernet cable to connect the Coaxial Ethernet Bridge
’s RJ45 connector and your PC’s
Ethernet port.
2.
Use the coaxial cable to connect the Coaxial Ethernet Bridge
’s F Connector and a coax jack on the wall.
3.
Connect the power cord to Coaxial Ethernet Bridge and plug the power cord to outlet.
4.
The Power LED indicator will light on after plugged to outlet.
5.
You can repeat steps 1 to 4 for connecting as many other links depending on your needs
.
6.
The COAX/ACT LED indicator starts blinking when the data communication proceeds on coaxial cable.
7.
The ETH/ACT LED indicator starts blinking when the data communication proceeds on Ethernet.
To share an xDSL with Internet access service via coaxial cable:
1.
Connect one Ethernet Bridge to broadband router
Plug the provided Ethernet cable into the RJ45 connector of the Coax Ethernet Bridge and plug the
other end of the cable into an available Ethernet port of the Router.
Use coaxial cable to connect the Coaxial Ethernet Bridge
’s F Connector and a coax jack on the wall.
Connect the power cord to Coaxial Ethernet Bridge and plug the power cord to outlet.
The Power LED indicator will light on after plugged to outlet.
2.
Follow up the above
section
“
To install PC local network and transmit data via coaxial cable
”
to install your
PC connection via coaxial cable. You will be able to access Internet through coaxial cable.
Coaxial Ethernet
Bridge
Coax jack on the wall
PC
To Power outlet
To Power outlet
Coaxial Ethernet
Bridge
Coax jack on the wall
DSL/Cable Modem
Intern
et
Networ
k
P
RODUCT
I
NSTALLATION
G
UIDE
