ALL1681205 - User Manual
Page 29
of 44
ALLNET GmbH Computersysteme 2015 – All rights reserved
Setup the HomePlug AV2s
For Twin Pack
HomePlug AV2s from a Twin Pack are preconfigured to have a common Private
Network Name unique for that pair. All you have to do is connect the HomePlug AV2s
to an Ethernet device and then plug it to a wall socket.
To setup a pair of HomePlug AV2s:
1.
Plug one end of the Ethernet cable to your Ethernet device and then connect
the other end to HomePlug AV2.
2.
Connect the HomePlug AV2 to a wall socket.
3.
Plug one end of the Ethernet cable to your other Ethernet device and then
connect the other end to HomePlug AV2.
4.
Connect the HomePlug AV2 to a wall socket.
For Single Pack
A HomePlug AV2 from a single pack uses a random Private Network Name that
prevents it from communicating with other HomePlug AV2s. To add it into an existing
network, you need to use either the Simple Connect button or the HomePlug AV2
Utility software to change the random Private Network Name to the Private Network
Name being used by the existing HomePlug AV2 network.
To add a HomePlug AV2 to an existing network:
1.
Plug one end of the Ethernet cable to your Ethernet device and then connect
the other end to your new HomePlug AV2.
2.
Connect the HomePlug AV2 to a wall socket.
3.
Add the new HomePlug AV2 by using either Simple Connect or the HomePlug
AV2 Utility software. To use Simple Connect, please refer to Joining an Existing
HomePlug AV2 Network. To use the HomePlug AV Utility, please refer to Private
Network Name.
