ALL1681205 - User Manual
Page 14
of 44
ALLNET GmbH Computersysteme 2015 – All rights reserved
Pairing the Device
Your HomePlug AV2 devices by default are preconfigured to have a common Private
Network Name. Setting up your HomePlug AV2 network is as easy as 1,2 and 3.
1.
It is advisable that you plug in your HomePlug AV2 devices side by side to easily
observe the LED behaviors of each HomePlug AV2. Wait until the Power and PL-ACT
LED turns ON to confirm that the connection has been established
2.
In ROOM A plug in your HomePlug AV2 into the wall socket then connect it to your
modem router’s Ethernet port using an Ethernet cable.
3.
In ROOM B plug in your HomePlug AV2 into the wall socket then connect it to your
computer’s Ethernet Port using an Ethernet cable. Your HomePlug AV2 is now ready
to use.
