ALL1681205 - User Manual
Page 26
of 44
ALLNET GmbH Computersysteme 2015 – All rights reserved
Step 5
To confirm if the connection was established, check the LEDs. The Power LEDs and
the Powerline Activity LEDs on all HomePlugs are on.
If the Powerline Activity LED
on HomePlug X is off, this means the pairing was
unsuccessful. You have to repeat steps 1 to 4 again until all LEDS in all HomePlug
AV/AV2 devices are ON.
Step 6
Unplug HomePlug Z and then connect it to your Ethernet device using the Ethernet
cables from the product package. After connecting the Ethernet cable, plug HomePlug
Z directly to a wall outlet. An Ethernet-enabled device can be a router, computer, hub,
gaming console, IP phone, network printer, or IP TV set-top box.
Note:
HomePlug AV2s work best when connected directly to a wall socket. It is
suggested to avoid plugging a HomePlug AV2 to a power strip or power extension as
much as possible. Other electrical devices in the power strip produce electrical noise
that may affect the overall performance of the HomePlug.
