manualshive.com logo in svg

Allnet ALL02800N, Manual, Page: 57 / 83

Share
Download
Allnet ALL02800N Manual Download Page 57

 

    

ALL02800N 300M Wireless-N Accesspoint 

57

 

 

 

 

  

  

    

format of ASCII and Hex. You can enter 
ASCII code (5 or 13 ASCII characters. Illegal 
character as  „/“ is not allowed.) Or 10/26 
hex characters.  

  

Default Key

  ：

Select one key from the four  

configured keys as the current available one.  

    

WPA-PSK Encryption Description  

  

WPA-WPA2 Algorithms

  ：

Select one from  

TKIP and AES.  

  

Pass Phrase

 

：

  Enter the encrypted  

characters with 8-63 ASCII characters.  

    

WPA2-PSK Encryption Description  

  

WPA-WPA2 Algorithms

  ：

Select one from  

TKIP and AES. Usually WPA2-personal 
supports AES.  

  

Pass Phrase

 

：

  Enter the encrypted  

characters with 8-63 ASCII characters.  

  

SSID

：

  SSID for connected device, obtained  

by scan or manual.  

  

MAC:

 The MAC address for connected device,  

obtained by scan or manual.  

  

Channel

：

  Specify the effective channel (from  

1

 

 

to 13\Auto) of the wireless network, 

obtained by scan or manual.  

  

  

  

    

Summary of Contents for ALL02800N




















































































Reviews:

No comments