Allnet ALL0236 User Manual Download Page 65

Page: 65 / 108

Wireless-N Broadband Router User Guide

Dynamic DNS (Domain Name Server)

This free service is very useful when combined with the

Virtual Server

feature. It allows

Internet users to connect to your Virtual Servers using a URL, rather than an IP Address.

This also solves the problem of having a dynamic IP address. With a dynamic IP address, your
IP address may change whenever you connect, which makes it difficult to connect to you.

DDNS Services work as follows:

1. You must register for the service at one of the listed DDNS Service providers.

2. After registration, use the Service provider's normal procedure to obtain your desired

Domain name.

3. Enter your DDNS data on the Wireless-N Broadband Router's DDNS screen, and enable

the DDNS feature.

4. The Wireless-N Broadband Router will then automatically ensure that your current IP

Address is recorded at the DDNS service provider's Domain Name Server.

5. From the Internet, users will be able to connect to your Virtual Servers (or DMZ PC)

using your Domain name, as shown on this screen.

Dynamic DNS Screen

Select

Advanced

on the main menu, then

Dynamic DNS

, to see a screen like the following:

Figure 49: DDNS Screen

Data - Dynamic DNS Screen

DDNS Service

Use a Dynamic
DNS Service

Use this to enable or disable the DDNS feature as required.

Service Provider

Select the desired DDNS Service provider.

Web Site

Click this button to open a new window and connect to the Web site
of the selected DDNS service provider.

Summary of Contents for ALL0236













































































































Search results

Summary of Contents for ALL0236

Reviews:

Related manuals for ALL0236

Brands by name

Popular brands

Allnet ALL0236, User Manual

Search results

Summary of Contents for ALL0236

Reviews:

Related manuals for ALL0236

Brands by name

Popular brands