Allnet ALL0236 User Manual Download Page 10

Page: 10 / 108

Chapter 2

Installation

This Chapter covers the physical installation of the Wireless-N Broadband
Router.

Requirements

•

Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors.

•

TCP/IP protocol must be installed on all PCs.

•

For Internet Access, an Internet Access account with an ISP, and a DSL connection.

•

To use the Wireless Access Point, all Wireless devices must be compliant with the IEEE
802.11g, IEEE 802.11b or IEEE 802.11n Draft specifications.

Procedure

Figure 4: Installation Diagram

1. Choose an Installation Site

Select a suitable place on the network to install the Wireless-N Broadband Router.

For best Wireless reception and performance, the Wireless-
N Broadband Router should be positioned in a central loca-
tion with minimum obstructions between the Wireless-N
Broadband Router and the PCs.

Also, if using multiple Access Points, adjacent Access

Summary of Contents for ALL0236













































































































Search results

Summary of Contents for ALL0236

Reviews:

Related manuals for ALL0236

Brands by name

Popular brands

Allnet ALL0236, User Manual

Search results

Summary of Contents for ALL0236

Reviews:

Related manuals for ALL0236

Brands by name

Popular brands