Allnet ALL-WAP0305AC, Manual

Page: 16 / 110

mounting surface.
To attach the ALL-WAP0305AC to a pole using the provided pole mounting kit:
3. Thread the open end
of the Pole Strap through the two tabs on the Pole Mount Bracket .
1. Place the lock and flat washers on the four hex cap screws and drive the screws to attach the bracket to the back of the Access
Point. 4. Lock and tighten the Pole Strap to secure the Pole
Mount Bracket to the pole.
2. Drive the four round head screws to attach the Pole Mount Bracket to the bracket. Note: See diagram
below for vertical and horizonal placements.
17