ALL-SG8308PM - User Manual
ALLNET GmbH Computersysteme 2015 – All rights reserved
28
threshold will then be dropped.
Storm Control Configuration
There are three type of traffic which can be rate limited, including
broadcast multicast frame and Flooded Uncast Rate.
Figure 1-13-1
Enable Rate Limit: Click the check box to enable storm control.
Rate (number of frames per second): The Rate field is set by a single
drop-down list. The same threshold is applied to every port on the
switch. When the threshold is exceeded, packets are dropped,
irrespective of the flow-control settings.
Web: Click PORTS, Storm Control. This page enables you to set the
broadcast storm control parameters for every port on the switch.
Figure 1-13-2
Monitoring
Statistic Overview
Statistic Overview for all ports
User can mirror traffic from any source port to a target port for real-time
analysis the following figures shows clearly the statistics overview.
