ALL-MC115VDSL2 Mini Modem Master/Slave Manual
9
When inserting a RJ-11 plug, make sure the tab on the plug clicks into position to ensure that it is properly seated.
Do not plug a RJ-11 phone jack connector into the Ethernet port (RJ-45 port). This may damage the bridge. Instead, use only
twisted-pair cables with RJ-45 connectors that conform to Ethernet standard.
Notes:
1.
Be sure each twisted-pair cable (RJ-45 ethernet cable) does not exceed 100 meters (333 feet).
2.
We advise using Category 5~7 UTP/STP cables for Cable bridge or Bridge connections to avoid any confusion
or inconvenience in the future when you attached to high bandwidth devices.
3.
RJ-11(VDSL2 Line port) use 24 ~ 26 gauge with twisted pair phone wiring, we do not recommend 28 gauge or
above.
4.
Be sure phone wire has been installed before ALL-MC115VDSL2
powered on.
