ALL-MC115VDSL2 Mini Modem Master/Slave Manual
13
3.2 Front Indicators
The bridge has
Eight
LED indicators. The following Table shows the description. (
Table 3-2
)
Table 3-2 LED Indicators Description and Operation
LED
Color
Status
Descriptions
PWR
(Power LED)
Green
On(Steady)
Lights to indicate that the VDSL2 bridge had power
Off
The device is not ready or has malfunctioned.
LAN 1-2
(Ethernet LED)
Green
On(Steady)
The device has a good Ethernet connection.
Blinking
The device is sending or receiving data.
Off
The LAN is not connected.
CO (Local Side)
(CO LED)
Green
On(Steady)
Indicate the VDSL2 bridge is running at CO(Master) mode.
CPE (Remote Side)
(CPE LED)
Green
On(Steady)
Indicate the VDSL2 bridge is running at CPE(Slave) mode.
LINE
(VDSL LINK LED)
Green
On(Steady)
The Internet or network connection is up.
Blinking slowly
The CO device is auto-detecting CPE device.
Blinking fastly
1. The CO device has detected a CPE device and ready to connect.
2. The device is sending or receiving data.
Off
The Internet or network connection is down or has malfunctioned.
Note:
Two Bridges connection may take within 3 minutes is normal, due to ALL-MC115VDSL2 to establish a link mechanism is
auto-negotiation, with detects and calculate CO and CPE both PBO and PSD level as well as noise level ....and other argument etc.
for getting a better connection.
