Allied Ho-Pac 1600 Safety, Operation, Maintenance And Parts Download Page 5

Page: 5 / 50

Allied Construction Products, LLC. www.alliedcp.com

TM103337_HP1600_18feb

SAFETY Information – [cont’d]

Safety, Identification and Information Labels

Information labels affixed to the Allied equipment
include safety warnings, identification and
instructions important to operation and service.

Keep all safety labels clean. Words and illustrations
must be legible. Before operating this equipment,
replace damaged or missing labels. Refer to the parts
section for ordering information. Refer to Figure S-2
for their location on the equipment.

Table S.1 Label Illustration and Description

Label

Figure

Description

Read the Manual

- Directs personnel to the manual for further

information and instructions

Stay Clear -

Alerts personnel and by-standers to maintain a safe

distance from the Allied work tool during operation.

Hot Surface

- Identifies surfaces of the Allied work tool that become

hot during operation.

Lift Point-

Identifies approved lift points of the Allied work tool.

Pressure I.D.

– A red colored cable tie marked “PRESSURE” is

attached to the pressure hose for ease of identification between
hoses.

Oil Fill

- Identifies the location for adding oil to reservoir.

Oil Level

- Identifies the location for checking the oil level.

Company Logo

– Is the Allied brand identifier and is a registered

trademark of Allied Construction Products, LLC.

Ho-Pac

Product Identification

– Ho-Pac is a registered trademark of Allied

Construction Products, LLC used for identifying the hydraulic vibratory
plate compactor / driver.

L10

1600

Model Identification

- Identifies the model of the Allied work tool.

L11

Made in USA

L12

Equipment Identification

– Contains Manufacturer’s Name and

Address, Product Name, CE compliance marking, Model Number,
Serial Number, Year of Manufacture, and Mass

Summary of Contents for Ho-Pac 1600



















































Search results

Summary of Contents for Ho-Pac 1600

Reviews:

Allied Ho-Pac 1600, Safety, Operation, Maintenance And Parts, Page: 5 / 50

Search results

Summary of Contents for Ho-Pac 1600

Reviews: