Allied Construction Products, LLC. www.alliedcp.com
26
TM103337_HP1600_18feb
12.0 Technical Data
Table 12.1 Specifications for HP1600
Impulse Force
16,000 [71,170]
Lbs. [N]
Cycles Per Minute
2100
1/min
Sound Power Level
108 (Est'd)
DBA [LWA]
Hydraulic Flow
a)
SN-1399&Down
34 [129]
gpm
[lpm]
Motor
Options
SN-1400&Up
1
25 [95]
2
30 [114]
3
43 [163]
Max Operating Pressure
SN-1399&Down
2300 [158]
psi
[bar]
Motor
Options
SN-1400&Up
1
3000 [207]
2
3000 [207]
3
2600 [180]
Operating Pressure @ No Load
300-1000 [20-35]
Auxiliary Circuit Relief
Pressure
Dynamic
b)
Max Ope 400 [28]
Static
Max Ope 650 [45]
Bearing Lubrication
Oil Type / Capacity
Factory filled with ISO VG32
d)
/ 3.9 qt. [3.7 l.]
Hose Size
Pressure
1 [25]
Inch
[mm]
Return
c)
1 [25]
Compaction Area
[Std]
6.4 [0.60]
Ft
2
[m
2
]
[Opt]
6.7 [0.67]
Compaction Plate
Dimensions
[Std]
29 x 32 [74 x 81]
Inch
(cm)
[Opt]
24 x 40 [61 x 102]
Weight
f)
Flat-Top SR/MR
e)
1565 [710]
Lbs.
[kg]
VMS-13, VMS-16
1595 [725]
Recommended Carrier
Weight
g)
Backhoe
19-25 [8.6-11.4]
Lbs. x 1,000
[kg] x 1,000
Excavator
20-45 [9-20.5]
a)
Select the Motor / Valve Package most suitable with host machine. Optimal performance requires an auxiliary hydraulic
circuit delivering the specified oil flow at a pressure equal to at least the dynamic relief pressure.
b)
Verify carrier’s main relief is set at manufacturer’s specifications. Set value must be equal to or greater than dynamic
relief setting.
c)
Unrestricted, free flowing return of 100 psi or less. At elevated pressures, motor efficiency and shaft seal life are
reduced
d)
Selection based on multiple factors including oil viscosity. Further details about bearing lubrication are found in the
Care & Maintenance Section of this manual.
e)
Use with SR/MR family mounting brackets.
f)
Working weight with typical mounting bracket.
g)
Values listed are guidelines. Ensure the work tool is attached only to carriers with proven load-carrying capacity.
Always consult the specifications of the equipment manufacturer for the load / lift chart.