Compliance, safety, and intended use
15
Mako U Technical Manual V1.1.8
Camera applications and intended use
General use
•
The camera is intended for use in a commercial, industrial, or business
environment. The test phase and programming should be carried out by
advanced users.
•
The user is responsible for operating the camera within the specifications that
are defined in this document, and within appropriate environmental conditions
and technical prerequisites, to ensure trouble-free camera operation.
•
The camera is compliant with current data communication standards; however,
those standards do not allow for self-monitoring. Thus, the camera cannot be
used as a standalone device for security-related monitoring operations.
•
The camera is a hardware product. Only when used with appropriate
accompanying software, the camera will produce the desired results.
The realization of intelligent solutions requires additional software that is
suitable to run with the camera.
•
The camera is a component, it is neither a complete product, nor is it a ready-
made technical solution.
•
The camera-supporting software can be obtained and installed separately from
the camera. Usage of the software is solely the responsibility of the user.
•
The camera must not be opened. For all repair tasks, contact Allied Vision or
one of Allied Vision's authorized representatives.
•
For usage in product with specific safety requirements a Quality Assurance
Agreement with Allied Vision is required.
•
Observe the intended use. The camera must only be used for purposes that are
in conformity with the stated intended use.
•
Additionally, refer to the warranty information on the Allied Vision website.
Use in medical devices
The camera provides basic adequacy to be used in medical devices as well,
however, is not specially designated for operation in medical devices. When used
as part of a medical device, a review of the specific application is necessary. For
usage in medical product, a Quality Assurance Agreement with Allied Vision is
required. Users who integrate the camera into an application must comply with the
rules and regulations concerning medical devices.
