Specifications
57
Mako G Technical Manual V4.2.2
Body dimensions (L x W x H)
60.5 x 29 x 29 mm
Mass (typical)
80 g
Interface
IEEE 802.3 1000BASE-T (Gigabit Ethernet), IEEE 802.3af (PoE)
Interface standard
GigE Vision Standard V1.2
Camera control standard
GenICam SFNC V1.2.1
Regulations
CE, RoHS, REACH, WEEE, FCC, ICES
Temperature monitoring
Available for main board only
Resolution: 0.031; Accuracy: ± 1 °C
1
For more information on available optical filters see the
2
These exposure time control values are only valid with factory/default settings. Exposure time control values vary
depending upon pixel format and width.
3
The Mako G-503B, G-503C supports
BinningHorizontalMode
=
Sum
or
Average
and
BinningVerticalMode
=
Sum
or
Average
.
4
These values are calculated directly from the microcontroller source. These values are only valid for pixel formats
< 16 bits per pixel and applicable in both Idle and Frame valid states:
•
Idle state: sensor is ready and camera is idle, waiting for the next trigger.
•
Frame valid state: sensor is reading out and camera is busy. If next frame is requested by an external trigger in
this state, higher latency may occur as compared to the Idle state.
Feature
Specification
Mako G-503B
Mako G-503C
Table 21: Mako G-503B, G-503C model specifications (continued)
