Introduction
Bonito Technical Manual
V2.2.1
7
continued from last page
V2.2.0
03.05.12
Added description of new features in camera firmware V1.0.7
•
Changed max. current from 0.36 A to 0.4 A:
– Description to power supply: see Chapter
Bonito CL-
400B/C, Bonito CL-400B/C 200fps
on page 12
– Chapter
Accessories
on page 20
– Chapter
Power supply (pin 1-4)
on page 23
•
Pin 6 changed from Reserve to Sync:
see Chapter
Camera I/O connector pin assignment (15-pin
D-Sub jack)
on page 23ff.
•
Chapter
Synchronization output (pin 6)
on page 24
•
In Chapter
Exposure output (pin 12-13)
on page 25: added
Note
This output is not recommended for new system
designs.
on page 26.
•
Added Chapter
Synchronization output (J)
on page 39
•
Updated the following chapter to new bit field order:
Chapter
Exposure control mode (M)
on page 40
•
Range from N=0 (not N=1) in Chapter
Number of lines (N)
on page 46
•
Added values 5 and 7 in Chapter
Camera Link output mode
setting (S)
on page 47
•
In Chapter
Reset to factory defaults (Z)
on page 51:
Corrected E=000006BE (not 000006C1),
F=000006BF (not 000006C2)
Inserted J=01 and S=00
•
Added new command reference description in Chapter
Command reference
on page 56
•
Added hyperlink to AVT website for DeviceConfig in Chapter
Serial I/O
on page 20
•
Changed AOI to ROI in the whole manual
to be continued on next page
Version
Date
Remarks
Table 1: Document history
