Allied Vision Technologies AVT Stingray Technical Manual Download Page 111

Page: 111 / 309

Description of the data path

STINGRAY Technical Manual

V2.2.0

110

How to store shading image

There are two storing possibilities:

•

After generating the shading image in the camera, it can be uploaded to
the host computer for nonvolatile storage purposes.

•

The shading image can be stored in the camera itself.

The following pictures describe the process of automatic generation of cor-
rection data. Surface plots and histograms were created using the

ImageJ

program.

•

On the left you see the source image with non-uniform illumination.

•

The surface plot on the right clearly shows a gradient of the brightness
(0: brightest

255: darkest pixels).

•

The histogram shows a wide band of gray values.

By defocusing the lens, high-frequency image data is removed from the
source image, therefore its not included in the shading image.

Figure 57: Shading correction: Source image with non-uniform illumination

surface plot

histogram

255.0

0.0

els

640.

0 pix

els

256

Count: 307200

Min: 79

Mean: 135.337

Max. 19

StdDev. 30.497

Mode: 88 (4200)

Summary of Contents for AVT Stingray






















































































































































































































































































































Search results

Summary of Contents for AVT Stingray

Reviews:

Related manuals for AVT Stingray

Brands by name

Popular brands

Allied Vision Technologies AVT Stingray, Technical Manual

Search results

Summary of Contents for AVT Stingray

Reviews:

Related manuals for AVT Stingray

Brands by name

Popular brands