Set up your AT-AR440S ADSL Router for Typical Network Scenarios
9
ATM settings
If the ATM settings are not correct for your ADSL Provider, you can correct them using the VPI,
VCI and Encapsulation fields at the bottom of the page.
In our example below, you can see the default VPI and Encapsulation
settings for the UK
are zero
and 38 respectively.
If applicable you should also add your PPP username and password, or your static IP address. You
will notice that when selecting PPPoA or PPPoE that the IP address fields are "greyed out", because
dynamic allocation is assumed. If you still need static IP addresses, this can be accessed via the GUI’s
Configuration
>
IP
menu.
Ensure
Enable Firewall
is ticked as this will provide a stateful inspection firewall, and NAT
solution.
