Set up your AT-AR440S ADSL Router for Typical Network Scenarios
3
Determining your ADSL connection parameters
The table below is provided for you to fill in the connection parameters for your ADSL Service
Provider and ISP. Typically, the provider will specify the parameters on the printed material that they
give you when you sign up for their service. But if you have not been given any such material, you
should contact your providers technical support help desks or Websites to determine their
requirements.
Table 1: ADSL technical requirements
Note: Your router also has the typical connection settings for different countries pre-defined.
You can try setting the country using the router's Graphical User Interface (GUI), and then
verify if the ATM settings are correct for your service provider. If not, then the connection
settings can still be altered through the GUI. Details on using the GUI are shown later in this
document.
Connection Parameters
AT-AR440S Default Values
(for country=none)
Required values for your
ADSL Service provider
Encapsulation
llc
VPI
0
VCI
35
Connection type
(e.g. PPPoE0A, PPPoA or RFC 1483 routed)
PPPoA
Authentication
Login name and password
(if applicable)
Your static public IP address
(if applicable, otherwise you will have a
dynamically assigned address)
DNS Server IP addresses
(Some ISP’s use PPP dynamic assignment to
automatically assign these addresses)
Primary server
Secondary server
