22
GS950PS V2 Series Quick Installation Guide
Restore the default settings: Pressing the button for more than 10
seconds restores the factory default values.
Note:
Restoring the default settings returns the management IP
address to 192.168.1.1. If your network does not have a DHCP
server, you will need to change the IP address on your computer to
connect to the switch again. Refer to the
GS950PS V2 Gigabit
Ethernet Switch Series Installation Guide
.
Note:
You can disable the reboot and factory default functions of the
eco-friendly button in the management software. Refer to the
GS950
PS V2 Gigabit Ethernet PoE+ Switch User Guide.
Troubleshooting
Problem:
All port and system LEDs are off, and the fans have
stopped.
Solutions:
The unit is not receiving power. Try the following:
Verify that the power cord is securely connected to the power
source and the AC connector on the back panel of the switch.
Verify that the power outlet has power by connecting another
device to it.
Problem:
All of the port LEDs are off even though the ports are
connected to active network devices.
Caution:
The switch temporarily stops forwarding
network traffic when you reboot it or restore the default
settings. Some network traffic may be lost.
E113