![Allied Telesis CentreCOM AT-810SL User Manual Download Page 3](http://html1.mh-extra.com/html/allied-telesis/centrecom-at-810sl/centrecom-at-810sl_user-manual_2903032003.webp)
i
Electrical Installation and Safety
Requirements
STANDARDS
: This product meets the following standards
RFI Emission EN55022 Class B
WARNING
: This product requires shielded cables to comply with Class B emission limits. If not
used with shielded cables, this product may cause radio interference in which case the user may
be required to take adequate measures.
Immunity EN50082-1
SAFETY
Electrical Safety EN60950, UL1950, CSA 950
ELECTRICAL NOTICES
WARNING:
ELECTRIC SHOCK HAZARD
To prevent ELECTRIC shock, do not remove cover. No user-serviceable parts inside. This unit
contains HAZARDOUS VOLTAGES and should only be opened by a trained and qualified technician.
To avoid the possibility of ELECTRIC SHOCK, disconnect electric power to the product before
connecting or disconnecting the LAN cables.
LIGHTNING DANGER
DANGER:
DO NOT WORK on equipment or CABLES during periods of LIGHTNING ACTIVITY.
CAUTION
: POWER CORD IS USED AS A DISCONNECTION DEVICE.
TO DE-ENERGISE EQUIPMENT, disconnect the power cord.
INSTALLATION
ELECTRICAL—AUTO VOLTAGE ADJUSTMENT
This product will automatically adjust to any voltage between the ranges shown on the label.
U.S. Federal Communications Commission
RADIATED ENERGY
Note: This equipment has been tested and found to comply with the limits for a Class A digital
device pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency and, if not
installed and used in accordance with this instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his
own expense.
Note: Modifications or changes not expressly approved by the manufacturer or the FCC, can
void your right to operate this equipment.
Canadian Department of Communications
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le
matériel brouilleur du Canada.