9
Your AT-810SL fanout requires minimal operator attention. For example,
when the Station Port is set to “Remote” mode of operation, access can be
through an AUI cable and transceiver to an Ethernet coaxial cable or fiber
optic cable.
Once installed and set for your configuration, the AT-810SL will be
transparent to both users and the network in general.
Port Connectors
Transceiver Port connectors as well as the Station Port connector are located
on the back panel. This is shown in Figure 5.
Figure 5: Port/Station Connector(s)
Note
All AT-810SL screws and mounting hardware use International
Standard metric threads. Do not attempt to replace them with a
different type of threaded screw.
Transceiver Ports (x8)
AUI Cable Connections to
DTE Workstations
Station Ports (x1)
AUI Cable Connections to
MAU Transceiver on coax
OFF
O
ON
I
LOCAL
REMOTE
PORT 1
PORT 2
PORT 3
PORT 4
PORT 5
PORT 6
PORT 7
PORT 8
POWER
SYSTEM
POWER
STATION
SQE TEST
SWITCH
LOCAL/REMOTE
SWITCH
CentreCOM
810SL
IEEE 802.3/ETHERNET
MULTIPORT
TRANSCEIVER FANOUT
Chapter 3
Operation
