CentreCOM AT-3624TS/AT-3624TRS Repeaters
23
SELF-TEST (Sequential Flashing Green)—This indicates the repeater is
conducting a power-ON self-test. The test continues until one port is
connected (valid link).
Figure 14 shows the port LEDs for the AT-3624TS.
Back Panel
Features
The AT-3624TS has the following back panel layout and features:
❑
Interrepeater bus connector that attaches the AT-3600 module to
the backplane bus in a concentrator chassis.
❑
Status indicators providing information on the hub as a whole; for
convenience, these LEDs appear on both the front and back panels.
❑
AUI port.
Sample Installations of the AT-3624TS Module
This section contains three separate procedures that detail sample
installations of the AT-3624TS. They are:
❑
Installing the Slave standalone.
❑
Installing the Slave in a non-managed hub configuration in a
two-slot rackmount chassis.
❑
Installing the Slave in a managed hub configuration in a four-slot
rackmount chassis.
Warning
Improper installation of the chassis can expose personnel to high voltages,
risking the possibility of injury or death.
Caution
Improper installation can expose the module to debris and block vents,
causing damage due to insufficient cooling.
Figure 14: AT-3624TS
Repeater Port LEDs
1
3
5
7
9
11
OFF ––––––––––––––– NO LINK
INDICATOR STATUS ––– PORT STATUS
ON GREEN –––––––– LINK
FLASHING GREEN –– RECEIVING
ON AMBER –––––––– PARTITIONED
FLASHING AMBER – COLLISION
10 BASE-T PORT ACTIVITY
10BASE-T PORTS 1-12
13
15
17
19
21
23
14
16
18
20
22
24
2
4
6
8
10
12
10BASE-T PORTS 13-24
