Allied Telesis Broadcom Advanced Control Suite 3, User Manual

Page: 65 / 80

Broadcom Advanced Control Suite 3 User’s Guide
65
Using the Expert Mode
Use Expert Mode to do the following team activities:

“Creating a Team” on page 65

“Modifying a Team” on page 70

“Displaying VLANs and Running VLAN Tests” on page 73

“Configuring LiveLink” on page 74
To set the default Teaming Mode to Expert Mode, select Options from the
Tools menu. In the Options window, click the General tab, then select
Expert Mode . The default is Wizard Mode.
To create a team using the Wizard Mode, see “Using the Broadcom
Teaming Wizard” on page 47.
Creating a Team
To create a team in the Expert mode, do the following:
Note
Enabling Dynamic Host Configuration Protocol (DHCP) is not
recommended for members of an SLB team.
1. Click the Team Management button at the bottom of the BACS 3
window, or from the View menu, select Navigate , then Team
Management .
2. Click Teams at the top of the Team Management pane, or select one
of the listed devices in the "Unassigned Adapters" section.
3. From the Team menu, select Create a Team , or right-click one of the
devices in the "Unassigned Adapters" section and select Create a
Team . See Figure 31 on page 66.