Chapter 2: Installation
62
Installing an AT-x230-18GP, AT-x230-18GT, or AT-x230-28GT switch
in an equipment rack
These instructions show you how to install an AT-x230-18GP,
AT-x230-18GT, or AT-x230-28GT switch in an equipment rack. The rack
mount kit is AT-RKMT-J13. This kit is included with your AT-x230-28GT
switch and can be purchased separately from your Allied Telesis dealer
for AT-x230-18GP and AT-x230-18GT switches.
To install one of these switches in a 19-inch equipment rack, follow these
steps:
1. If rubber feet are attached to the base of the switch, remove them
2. Attach two rack mount brackets to the sides of the switch using the six
bracket screws that come with the rack mount kit AT-RKMT-J13
(Figure 35).
F
IGURE
35. A
TTACHING
RACK
MOUNT
BRACKETS
TO
THE
AT-
X
230-18GP,
AT-
X
230-18GT,
OR
AT-
X
230-28GT
SWITCH
