Allied Telesis AT-WCP201G, Installation Manual, Page: 59 / 73

59
Chapter 3
Microsoft Windows XP
This chapter contains the procedures for configuring the wireless adapter
on a Microsoft Windows XP system. Sections in the chapter include:
ˆ
“Setting the IP Address” on page 60
ˆ
“Quick Configuration” on page 63
ˆ
“Manually Configuring the Wireless Adapter” on page 66
Note
The wireless adapter is supported on Microsoft Windows 2000, but
this guide does not contain instructions for configuring the adapter
on that operating system.
Note
You can use either the procedures in this chapter to configure the
wireless adapter or the Wireless Configuration utility discussed in
the previous chapter, but not both simultaneously. If you installed the
utility but now prefer to use Windows to configure the adapter, you
must indicate your choice by displaying the Wireless Network
Connection Properties window for the adapter by performing steps 1
to 4 in “Manually Configuring the Wireless Adapter” on page 66 and
at the top of the tab clicking
Use Windows to configure my
wireless network settings .