Allied Telesis AT-WCP201G, Installation Manual, Page: 47 / 73

AT-WCP201G Wireless Adapter Card Installation Guide
47
Configuring the IP Address
To configure the IP address for a Preferred WLAN profile or to activate the
DHCP client, perform the following procedure:
1. Start the configuration program by clicking the program’s icon, shown
in Figure 25 on page 37, located in the toolbar on the desktop.
The main window of the configuration utility is shown in Figure 26 on
page 37.
Note
Perform step 2 if you created profile groups, which are optional. For
further information, refer to “Working with Profile Groups” on
page 54
2. In the Profile Group Control section of the Configuration tab, click the
group containing the profile whose IP address you want to assign or
modify.
3. In the Preferred WLANs section of the window, click the Preferred
WLAN profile whose IP address you want to assign or change.
4. Click Properties .
5. The Wireless Network Properties window, containing the parameter
settings of the selected WLAN profile, is displayed. An example of the
window is shown in Figure 28 on page 41.
6. Click IP & Proxy Setting .