Allied Telesis AT-WCP201G, Installation Manual, Page: 37 / 73

AT-WCP201G Wireless Adapter Card Installation Guide
37
Starting the Configuration Utility
To start the Wireless Adapter Configuration utility, double-click the
configuration utility icon in the Windows toolbar.
Figure 25. Configuration Utility Icon
Alternatively, select the following from the Start Menu: Start ->
Programs -> Allied Telesyn -> AT-WCP201G Configuration Wizard .
The program consists of four tabs: Configuration, Status, Option, and
About. The Configuration tab, shown in Figure 26, is displayed by
default when you start the program.
Figure 26. Configuration Tab
The sections in the Configuration tab are described here:
Available WLANs
This section of the Configuration tab displays information about the
wireless routers and access points of the networks detected by the
wireless adapter. This section will be empty if no wireless networks are
detected.