Allied Telesis AT-WCP201G, Installation Manual, Page: 66 / 73

Chapter 3: Microsoft Windows XP
66
Manually Configuring the Wireless Adapter
The following procedure explains how to configure the wireless adapter for
the following wireless network environments:
ˆ
No security
ˆ
WEP security
ˆ
WPA-PSK and WPA2-PSK security
Note
The AT-WCP201G wireless adapter also supports Ad Hoc, WPA/
WPA2 (Enterprise), and 802.1x authentication. These topics are
beyond the scope of this manual.
To manually configure the wireless adapter’s security settings, perform the
following procedure:
1. Open the Control Panel .
2. Double-click on Network Connections .
An example of the Network Connections window is shown in Figure 36
on page 60.
3. Right-click on the Wireless Network Connection icon of the wireless
adapter and select Properties from the pull-down menu, as shown in
Figure 37 on page 60.
The Wireless Network Connections Properties window is shown in
Figure 38 on page 61.
4. Select the Wireless Networks tab.