Allied Telesis AT+TQm5403, Installation Manual

Page: 40 / 58

Chapter 2: Wireless Access Point Installation
40
Install Ethernet
Cables and
External DC
Power Supply
The Ethernet and power cables need to be connected before attaching the
access point to the mounting bracket.
Note
Refer to “Cable Specifications” on page 50 when selecting Ethernet
cables.
1. Connect one Ethernet cable into the RJ-45 LAN1 port. Refer to
Figure 13. This is the primary Ethernet port, which also capable of
receiving PoE power.
Figure 13. Connect Ethernet Cables to LAN1 Port
2. If you choose to have more than one Ethernet LAN connection:
a. Remove the dust plug on the LAN2 port. Refer to Figure 14.
Figure 14. Remove Dust Plug from LAN2 Port
b. Connect the second Ethernet cable into the RJ-45 LAN2 port.
Refer to Figure 15
Figure 15. Connect Ethernet Cables to LAN2 Port