Allied Telesis AT+TQm5403, Installation Manual

Page: 35 / 58

AT-TQ5403 Series Wireless Access Point Installation Guide
35
3. The installation of your access point on the table top surface is now
complete.
Ceiling or Wall -
Mounting
Bracket
Installation
This section explains how to install the access point on a ceiling or wall
that consists of a hard surface. The following topics are included:
• ”Preparation for Ceiling or Wall Installation”
• “Pre-Fit Mounting Bracket on Access Point” on page 36
• “Install Mounting Bracket on Ceiling or Wall” on page 37
• “External AC/DC Power Adapter Installation” on page 41
• “Install Anti-theft Device” on page 42
• “Ceiling or Wall - Attach Access Point to Mounting Bracket” on
page 43
Preparation for Ceiling or Wall Installation
You need the following items to install the access point on a ceiling or wall:
• AT - TQ5403 or AT - TQm5403 Access Point
• Two screws to attach to the access point to mounting bracket
• Mounting bracket
• Four (4) M4, 25.0 mm flat-head wood screws and optional anchors
(not provided) for fastening the mounting bracket
• Phillips head screwdriver (not provided)
• Pencil (not provided)
• External AC/DC power supply (optional and not provided - Allied
Telesis recommends the AT - MWS0091 AC/DC Power Adapter.)
• Kensington Lock (optional and not provided)
Note
The four Phillips head M4 screws/anchors, the Phillips head
screwdriver, pencil, external AC/DC power supply and Kensington
Lock are
not
included in the shipping box.