Allied Telesis AT+TQm5403, Installation Manual

Page: 27 / 58

AT-TQ5403 Series Wireless Access Point Installation Guide
27
LEDs
The LEDs on the top panel display the status information. This LED
display status information is given in Table 2.
Table 2. LED Status Information
LED State Description
Power
GREEN The access point is powered ON and
operating normally.
RED System is booting up.
Or
A fault condition has been detected.
BLINKING RED The firmware is upgrading.
OFF The access point is
not
receiving
power.
LAN1
GREEN A valid link is established on the port.
BLINKING GREEN Data is being transmitted and received.
OFF
No link is established.
LAN2
GREEN A valid link is established on the port.
BLINKING GREEN Data is being transmitted and received.
OFF
No link is established.
2.4GHz
Wi-Fi
GREEN The 2.4GHz Wi-Fi interface is enabled.
OFF
The 2.4GHz Wi-Fi interface is disabled.
5 GHz
1
Wi-Fi
GREEN The 5GHz Wi-Fi interface is enabled.
OFF
The 5GHz Wi-Fi interface is disabled.
5 GHz
2
Wi-Fi
GREEN The 5GHz Wi-Fi interface is enabled.
OFF
The 5GHz Wi-Fi interface is disabled.