Configuring Interfaces
Configuring VLANs
Page 97
•
PVID
— Port Default VLAN ID
.
Assigns a VLAN ID to untagged packets. The possible values are 1-4094.
VLAN 4095 is defined as per standard and industry practice as the Discard VLAN. Packets classified to the
Discard VLAN are dropped.
•
Frame Type
— Specifies the packet type accepted on the port. The possible field values are:
–
Admit Tag Only —
Only tagged packets are accepted on the port.
–
Admit All —
Both tagged and untagged packets are accepted on the port.
•
Ingress Filtering
— Indicates whether ingress filtering is enabled on the port. The possible field values are:
–
Enable —
Enables ingress filtering on the device. Ingress filtering discards packets that are defined to
VLANs of which the specific port is not a member.
–
Disable —
Disables ingress filtering on the device.
•
Reserved VLAN
— Indicates the VLAN that is currently reserved for internal use by the system.
2.
Select an interface from the table.
3.
Click
Modify
. The
VLAN Interface Configuration Page
opens:
Figure 69: VLAN Interface Configuration Page
In addition to the
VLAN Interface Page
, the
VLAN Interface Configuration Page
contains the following field:
•
Reserve VLAN for Internal Use
— Indicates which VLAN is reserved for internal use by the system. One
VLAN must be reserved.
4.
Define the fields.
5.
Click
Apply
. The VLAN interface configuration is saved and the device is updated.
6.
Click
Save Config
on the menu to permanently save the change.
