Allied Telesis AT-MS201, Installation Manual, Page: 3 / 40

iii
Electrical Safety and Installation
Requirements
STANDARDS : This product meets the following standards
RFI Emission EN55022 Class B
Immunity EN50082-1
Electrical Safety EN60950, UL1950, CSA 950
Laser EN60825
SAFETY
ELECTRICAL NOTICES
WARNING
: ELECTRIC SHOCK HAZARD
To prevent ELECTRIC shock , do not remove cover. No user-serviceable parts inside.
This unit contains HAZARDOUS VOLTAGES and should only be opened by a trained
and qualified technician. To avoid the possibility of ELECTRIC SHOCK disconnect
electric power to the product before connecting or disconnecting the LAN cables.
This is a “CLASS 1 LED PRODUCT”
U.S. Federal Communications Commission
RADIATED ENERGY
Note: This equipment has been tested and found to comply with the limits for a
Class A digital device pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Note: Modifications or changes not expressly approved by the manufacturer or the
FCC can void your right to operate this equipment.
Canadian Department of Communications
This Class A digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations.
Cet appariel numérique de la classe A respecte toutes les exigences du Règlement
sur le matériel brouilleur du Canada.