Allied Telesis AT-IE200-6FP-80, Command Reference Manual

Page: 872 / 1474

872 Command Reference for IE200 Series Industrial Managed PoE+ Switches C613-50066-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5I-0.x
A
UTHENTICATION
C
OMMANDS
AUTH TIMEOUT QUIET
-
PERIOD
auth timeout quiet-period
Overview This command sets the time period for which the authentication request is not
accepted on a given interface, after the authentication request has failed an
authentication.
Use the no variant of this command to reset quiet period to the default (60
seconds).
Syntax
auth timeout quiet-period < 1-65535 >
no auth timeout quiet-period
Default The quiet period of port authentication is 60 seconds.
Mode Interface Configuration for a static channel, a dynamic (LACP) channel group, or a
switch port.
Examples To set the quiet period to
10
for interface
port1.0.2
, use the following
commands:
awplus# configure terminal
awplus(config)# interface port1.0.2
awplus(config-if)# auth timeout quiet-period 10
To reset the quiet period to the default (60 seconds) for interface
port1.0.2
, use
the following commands:
awplus# configure terminal
awplus(config)# interface port1.0.2
awplus(config-if)# no auth timeout quiet-period
Parameter Description
< 1-65535 >
Seconds.